The Arsenal Files 2/The Arsenal Files 2 (Arsenal Computer).ISO/os2/tcp20c2.exe/BASEC2.ZIP/HELP/cnbapp.HLP

OS/2 Help File | 1994-05-16 | 69.3 KB | 2,507 lines

ΓòÉΓòÉΓòÉ 1. TCP/IP Configuration Notebook Keys Help ΓòÉΓòÉΓòÉ

TCP/IP Configuration Notebook key operations include:

o Cursor Movement Keys
o Editing Keys
o Text Selection Keys


ΓòÉΓòÉΓòÉ 1.1. Cursor movement keys ΓòÉΓòÉΓòÉ

Use these keys to move the cursor through the various screens:

Key           Description
Up            Moves the cursor up to the previous field.
Down          Moves the cursor down to the next field.
Right         Moves the cursor right one character.
Left          Moves the cursor left one character.
Home          Moves the cursor to the beginning of the current line.
End           Moves the cursor to the end of the current line.
Tab           Moves the cursor to the next field or button on the screen.
Page Up       Scrolls the text in the lists up one window.
Page Down     Scrolls the text in the lists down one window.


ΓòÉΓòÉΓòÉ 1.2. Editing keys ΓòÉΓòÉΓòÉ

Use these keys to edit the text in the various fields:

Key           Description
Insert        Switches between insert and overtype mode.

              In insert mode, new text is inserted at the cursor position,
              moving the existing text to the right.

              In overtype mode, the new text replaces the existing text.
Delete        If text is selected, the selected text is deleted.
Backspace     If text is selected, the selected text is deleted. If no text is
              selected, the character to the left of the cursor is deleted, and
              any remaining characters to the right of the cursor are shifted
              left.
Shift+Del     Cuts the selected text out of the file and saves it in the
              Clipboard.
Shift+Ins     Pastes the text in the Clipboard into the file at the cursor
              position.

              If text is selected, the Clipboard text will replace the selected
              text.

              If no text is selected, the Clipboard text is inserted at the
              cursor position.
End           Moves the cursor to the end of the current line.
Page Up       Scrolls the text in the lists up one window.
Page Down     Scrolls the text in the lists down one window.


ΓòÉΓòÉΓòÉ 1.3. Text selection keys ΓòÉΓòÉΓòÉ

Use these keys to select text and extend existing selected areas of text.

CAUTION:

If an area of text is selected, pressing any character key, the Backspace key,
or the Delete key deletes the selected text from the file.

Key                  Description
Shift+arrow          Selects text or extends a selection in the direction of
                     the arrow.
Shift+Home           Selects text or extends a selection to the beginning of
                     the current line.
Shift+End            Selects text or extends a selection to the end of the
                     current line.
Shift+Ctrl+Right     Selects text or extends a selection to the beginning of
                     the next word.
Shift+Ctrl+Left      Selects text or extends a selection to the beginning of
                     the previous word.
Shift+Ctrl+Home      Selects text or extends a selection to the beginning of
                     the file.
Shift+Ctrl+End       Selects text or extends a selection to the end of the
                     file.


ΓòÉΓòÉΓòÉ 2. Configuring Automatic Starting of Services ΓòÉΓòÉΓòÉ

Use this page to configure automatic starting of TCP/IP services when either
INETD is started or TCP/IP is started.

The following servers and programs can be configured to start automatically:

o INETD
o TELNETD
o FTPD
o TFTPD
o REXECD
o RSHD
o LPD
o LPRPORTD
o NFSD
o NFSSTART
o ROUTED
o SENDMAIL
o LaMail
o PMX
o TALKD
o Portmap
o SNMPD

To enable a service to start automatically, select that service's check box.
If that service has an entry field, enter the parameters needed to start the
service.

To start a service using INETD when TCP/IP is started, select the INETD radio
button.

To start a service in an OS/2 window when TCP/IP is started, select the
Foreground session radio button. If you choose to start a service in a
foreground session, you can select the Minimized check box to minimize the OS/2
window.

For help on any selectable item, select the item and press F1 or the Help
pushbutton.

Pushbuttons

The following pushbuttons are available on this page:

o Undo
o Defaults
o Help


ΓòÉΓòÉΓòÉ 2.1. Automatically Starting INETD ΓòÉΓòÉΓòÉ

Select this check box to start INETD when TCP/IP is started.

INETD is a super server that can start any of the following servers when a
connection request for a service is received:

o TELNETD
o FTPD
o TFTPD
o REXECD
o RSHD
o LPD

You can use INETD as an alternative to starting each individual server. If you
use INETD to autostart TCP/IP services, any parameters that you specify will be
ignored.

However, for TFTPD, you can add the following environment variable to your
CONFIG.SYS to specify the default path:

  SET TFTPDPATH=<path>
And for REXECD, you can add the following environment variable to your
CONFIG.SYS to specify the timeout:

  SET REXECDTIME=<time>

Deselect this check box to disable the INETD super server from starting when
TCP/IP is started.  This is the default.

Warning: Do not attempt to start a server if it is already started.  Multiple
instances of the same active server may cause unpredictable results.


ΓòÉΓòÉΓòÉ 2.2. Automatically Starting the TELNETD Server ΓòÉΓòÉΓòÉ

Select this check box to start the TELNETD server either using INETD or in an
OS/2 window when TCP/IP is started.

When the TELNETD server is started, users on other hosts can login to your host
if they know the Telnet password.

If you select to automatically start this service, you can also specify the
following command parameters in the entry field:

o -p port
o -b
o -d
o -l
o -e escapedelay
o -u password

Deselect this check box to disable automatic starting of TELNETD when TCP/IP is
started.  This is the default.


ΓòÉΓòÉΓòÉ 2.3. Automatically Starting the FTPD Server ΓòÉΓòÉΓòÉ

Select this check box to start the File Transfer Protocol (FTP) server either
using INETD or in an OS/2 window when TCP/IP is started.

When the FTPD server is started, users on foreign hosts can transfer files to
and from your host. The TRUSERS file lists the usernames, passwords, and access
rights of the users who can FTP to your machine.

If you select to automatically start this service, you can also specify the
following command parameters in the entry field:

o -p port

Deselect this check box to disable automatic starting of FTP when TCP/IP is
started.  This is the default.


ΓòÉΓòÉΓòÉ 2.4. Automatically Starting the TFTPD Server ΓòÉΓòÉΓòÉ

Select this check box to start the Trivial File Transfer Protocol (TFTP) server
either using INETD or in an OS/2 window when TCP/IP is started.

When the TFTPD server is started, users on other hosts can transfer files to
and from your host.  No username or password is required.

If you select to automatically start this service, you can also specify the
following command parameters in the entry field:

path

Deselect this check box to disable automatic starting of TFTPD when TCP/IP is
started.  This is the default.


ΓòÉΓòÉΓòÉ <hidden> The TFTPD Parameter ΓòÉΓòÉΓòÉ

If you select to automatically start TFTPD, you can also specify the following
command parameters in the entry field:

o path


ΓòÉΓòÉΓòÉ 2.5. Automatically Starting the REXECD Server ΓòÉΓòÉΓòÉ

Select this check box to start the Remote Execution Protocol (REXEC) server
either using INETD or in an OS/2 window when TCP/IP is started.

When the REXECD server is started, you can issue a command on a foreign host
and receive the results on your local host using the rexec command.

REXECD provides automatic logon and user authentication, depending on the
parameters specified in the rexec command and the NETRC file environment
variables set by the user.

Deselect this check box to disable automatic starting of REXECD when TCP/IP is
started.

If you select to automatically start this service, you can also specify the
following command parameters in the entry field:

o -t seconds


ΓòÉΓòÉΓòÉ 2.6. Automatically Starting the RSHD Server ΓòÉΓòÉΓòÉ

Select this check box to start the RSHD server either using INETD or in an OS/2
window when TCP/IP is started.

When the RSHD server is started, you can issue a command on a foreign host and
receive the results on your local host using the rsh command.

The RSHD server does not require or allow the client to specify a password, but
looks to the RHOSTS file to determine access privileges.

Deselect this check box to disable automatic starting of RSHD when TCP/IP is
started.  This is the default.


ΓòÉΓòÉΓòÉ 2.7. Automatically Starting the LPD Server ΓòÉΓòÉΓòÉ

Select this check box to start the line printer (LPD) server either using INETD
or in an OS/2 window when TCP/IP is started.

When the LPD server is started, users on foreign hosts can print files on your
local printer.

If you select to automatically start this service in a foreground session, you
can also specify the LPD Parameters in the entry field.

If you select the INETD radio button, you cannot specify the LPD parameters.

Deselect this check box to disable the automatic starting of LPD when TCP/IP is
started.  This is the default.


ΓòÉΓòÉΓòÉ <hidden> LPD Parameters ΓòÉΓòÉΓòÉ

If you select to automatically start LPD, you can also specify the following
command parameters in the entry field:

o -c
o -b banner
o -s
o -f


ΓòÉΓòÉΓòÉ 2.8. Automatically  Starting the TALKD Server ΓòÉΓòÉΓòÉ

Select this check box to start the TALKD server when TCP/IP is started. You can
select the Minimized check box to minimize the OS/2 window in which the service
is started.

When the TALKD server is started, you can issue the talk command to send and
receive interactive electronic messages between local and foreign hosts.

Deselect this check box to disable the automatic starting of TAKLD when TCP/IP
is started.  This is the default.


ΓòÉΓòÉΓòÉ 2.9. Automatically Starting the NFSD Server ΓòÉΓòÉΓòÉ

Select this check box to start the NFSD server when TCP/IP is started. You can
select the Minimized check box to minimize the OS/2 window in which the service
is started.

The NFSD server enables your workstation to share files with other machines
that have the NFS client active.

If you select to automatically start the NFS server, ensure that PORTMAP is
also automatically started.

Deselect this check box to disable the automatic starting of NFSD when TCP/IP
is started.


ΓòÉΓòÉΓòÉ 2.10. Automatically Starting the NFSSTART Command File ΓòÉΓòÉΓòÉ

Select this check box to start the NFSSTART command file when TCP/IP is
started.

NFSSTART starts the NFS client control program, NFSCTL.EXE, which mounts to the
local file system remote NFS servers specified in the FSTAB file.

Additionally, NFSSTART verifies the HOSTNAME environment variable, validates
parameters, and removes mounts left from abnormal termination of the control
program.

If you select to automatically start this service, you can also specify the
NFSSTART Parameters in the entry field.

Deselect this check box to disable the automatic starting of NFSSTART when
TCP/IP is started.


ΓòÉΓòÉΓòÉ <hidden> NFSSTART Parameters ΓòÉΓòÉΓòÉ

If you select to automatically start NFSSTART, you can also specify the
following command parameters in the entry field:

o etc_dir
o -bn
o -rn
o -tn
o -sn
o -p
o -w
o -c
o -z
o -i


ΓòÉΓòÉΓòÉ 2.11. Automatically Starting the ROUTED Server ΓòÉΓòÉΓòÉ

Select this check box to automatically start the ROUTED server when TCP/IP is
started. You can select the Minimized check box to minimize the OS/2 window in
which the service is started.

The ROUTED server queries the network and dynamically builds routing tables
from information transmitted by other hosts that are directly connected to the
network.

If you select to automatically start this service, you can also specify the
ROUTED Parameters in the entry field.

Deselect this check box to disable the automatic starting of ROUTED starting
when TCP/IP is started.


ΓòÉΓòÉΓòÉ <hidden> ROUTED parameters ΓòÉΓòÉΓòÉ

If you select to automatically start ROUTED, you can also specify the following
command parameters in the entry field:

o -d
o -g
o -s
o -q
o -t
o -t -t
o -t -t -t
o -t -t -t -t


ΓòÉΓòÉΓòÉ 2.12. Automatically Starting the SENDMAIL Server ΓòÉΓòÉΓòÉ

Select this check box to start the SENDMAIL server when TCP/IP is started. You
can select the Minimized check box to minimize the OS/2 window in which the
service is started.

SENDMAIL uses Simple Mail Transfer Protocol (SMTP) to route mail from one host
to another host, allowing you to exchange mail with other hosts that support
SMTP.  Use the LaMail program to create, modify, and manage your mail.

If you select to automatically start this service, you can also specify the
SENDMAIL Parameters in the entry field.

Deselect this check box to disable the automatic starting of SENDMAIL when
TCP/IP starts.


ΓòÉΓòÉΓòÉ <hidden> SENDMAIL Parameters ΓòÉΓòÉΓòÉ

If you select to automatically start SENDMAIL, you can also specify the
following command parameters in the entry field:

o -bd
o -qtime
o -d
o -d1.1


ΓòÉΓòÉΓòÉ 2.13. Automatically Starting the LaMail Program ΓòÉΓòÉΓòÉ

Select this check box to start the LaMail program when TCP/IP is started. You
can select the Minimized check box to minimize the OS/2 window in which the
service is started.

LaMail is an electronic mail handling system that allows you to view mail,
create and send mail, and organize mail in mail folders.

Deselect this check box to disable the automatic starting of LaMail when TCP/IP
is started.


ΓòÉΓòÉΓòÉ 2.14. Automatically Starting the PMX Server ΓòÉΓòÉΓòÉ

Select this check box to start the PMX server when TCP/IP is started. You can
select the Minimized check box to minimize the OS/2 window in which the service
is started.

The PMX server enables you to display and control X Window System ** client
application programs in OS/2 windowed sessions.  Using OS/2 Presentation
Manager (PM) as the X Window System manager enables OS/2 PM windowed
applications and X Window System client applications to share the same screen.

If you select to automatically start this service, you can also specify the PMX
Parameters in the entry field.

Deselect this check box to disable the automatic starting of PMX when TCP/IP is
started.


ΓòÉΓòÉΓòÉ <hidden> PMX Parameters ΓòÉΓòÉΓòÉ

If you select to automatically start PMX, you can also specify the following
command parameters in the entry field:

o -bwcursor
o -clickclienttoraise
o -clickframetoraise
o -co filename
o -colorcursor
o -explicitfocus
o -fc fontname
o -fn fontname
o -fp pathname
o -I
o -iconify
o -implicitfocus
o -k n
o -lc
o -logpath directory
o -nocascade
o -nocopyright
o -pmcursor
o -pseudocolor
o -r
o r
o -reversebwcursor
o -reversecolorcursor
o -staticcolor


ΓòÉΓòÉΓòÉ 2.15. Automatically Starting the LPRPORTD Server ΓòÉΓòÉΓòÉ

Select this check box to start the LPRPORTD server when TCP/IP is started.

LPRPORTD supports LPD port functions and enables printing to a port icon.

Deselect this check box to disable the automatic starting of LPRPORTD when
TCP/IP is started.


ΓòÉΓòÉΓòÉ 2.16. Automatically Starting the Portmapper Server ΓòÉΓòÉΓòÉ

Select this check box to start the Portmapper server when TCP/IP is started.

Portmapper must be started before the NFS server can start.

Deselect this check box to disable the automatic starting of Portmapper when
TCP/IP is started.


ΓòÉΓòÉΓòÉ 2.17. Automatically Starting the SNMP Agent ΓòÉΓòÉΓòÉ

Select this check box to start the SNMP agent when TCP/IP is started.

Before you start the SNMP agent, ensure that you have:

o Defined the values for SYSCONTACT and SYSLOCATION in your CONFIG.SYS

o Defined a community name for this agent by creating and scrambling the PW.SRC
  file

o Defined a list of SNMP clients to which traps are sent, by creating the
  SNMPTRAP.DST file

You can use the Configure SNMP pages of the TCP/IP Configuration notebook to
make these changes.

Deselect this check box to disable the automatic starting of the SNMP agent
when TCP/IP is started.


ΓòÉΓòÉΓòÉ <hidden> Minimized ΓòÉΓòÉΓòÉ

Select this check box to minimize the OS/2 window in which a service has been
started.


ΓòÉΓòÉΓòÉ 2.18. INETD and Foreground Session Radio Buttons ΓòÉΓòÉΓòÉ

Select one radio button to choose when the server is started:

INETD
   The server is started when a connection request for that server is received
   by INETD.
Foreground session
   The server is started in an OS/2 window when TCP/IP is started.


ΓòÉΓòÉΓòÉ 3. Configuring SLIP Interface Parameters ΓòÉΓòÉΓòÉ

Use this window to configure the Serial Line Internet Protocol (SLIP)
interface.  A SLIP interface enables you to connect to a remote host as a
point-to-point link over a serial line.  The serial line can be a telephone
line using a modem or a null-modem cable.

Select the Enable the SLIP Interface check box to use the SLIP interface.

Select a radio button to specify how to use VJ Compression.

To complete configuring the SLIP interface, supply values for the following
parameters:

o Communications Port
o Maximum Transmission Unit
o Script File
o Script Attachment Parameters
o IP Address
o Destination Address

The SLIP interface parameters are saved in \TCPIP\ETC\SLIP.CFG. The SLIP IP
address and destination address define a point-to-point link and are saved in
the \TCPIP\BIN\SETUP.CMD file.

For help on any selectable field, select the field and press F1 or the Help
pushbutton.

Pushbuttons

The following pushbuttons are available on this page:

o Undo
o Defaults
o Help


ΓòÉΓòÉΓòÉ 3.1. Enable the SLIP Interface ΓòÉΓòÉΓòÉ

Select this check box to activate the SLIP interface.

Deselect this check box to deactivate the SLIP interface.


ΓòÉΓòÉΓòÉ 3.2. Communications Port ΓòÉΓòÉΓòÉ

Type the name of the OS/2* communications port on your host which is attached
to the modem.  The default communications port is COM1.

The port name is saved as the SLIP.COM environment variable. This field is
required.


ΓòÉΓòÉΓòÉ 3.3. VJ Compression ΓòÉΓòÉΓòÉ

Select one radio button to determine VJ compression:

Off
   The data is never compressed.
On
   The data is always compressed.
Auto
   Accept and start compression if compressed packets are received.


ΓòÉΓòÉΓòÉ 3.4. Maximum Transmission Unit ΓòÉΓòÉΓòÉ

Type the maximum size of a transmission unit that your modem will transmit.
Valid maximum transmission unit values range from 296-2048.  The default is
296. This field is required only for serial lines using modems.


ΓòÉΓòÉΓòÉ 3.5. Script File ΓòÉΓòÉΓòÉ

Type the name of the REXX file that specifies the script to automate the SLIP
interface attachment.  The default script file is FONUSER.CMD.

If you specify a script file, the IP Address and Destination Address entry
fields are not required, and the Script Attachment Parameters entry field is
required.

The following sample SLIP scripts are provided with TCP/IP and can be found in
the \TCPIP\BIN directory:

PHONE.CMD
   You can use this script for a basic SLIP client that does not require a
   userid and password prior to starting a SLIP connection.
DIRECT.CMD
   You can use this script for a direct connection between two asynchronous
   lines.
AUTO.CMD
   You can use this script to put your modem into auto answer mode to enable
   others to dial into your host.
FONUSER.CMD
   You can use this script for a basic SLIP client that does not require a
   userid or password before starting a SLIP connection.
SLIPUP.CMD
   You can use this script to connect to a SLIP server that requires a userid
   and password before receiving a SLIP connection.
AUTOANS.CMD
   You can use this script to put your modem in auto answer mode and receive
   calls from other SLIP clients.

For more information on SLIP script files, refer to TCP/IP for OS/2
Installation and Administration.


ΓòÉΓòÉΓòÉ 3.6. Script Attachment Parameters ΓòÉΓòÉΓòÉ

Type the parameters required by your modem to attach to the remote host using
the SLIP interface.  This field is required if you specify a script file.

The following is an example of script attachment parameters:

ATDT 5551122 &H1 &B1

Refer to your modem's user's guide for modem attachment parameters.


ΓòÉΓòÉΓòÉ 3.7. IP Address ΓòÉΓòÉΓòÉ

Type the Internet Protocol (IP) Address of your host's SLIP interface in 32-bit
dotted decimal notation. For example 9.67.43.126 is an IP Address. If the
ipaddress keyword appears in your SLIP configuration file, this parameter is
passed to the REXX attachment script. This field is required if you do not
specify a script file.

Enter the IP Address as a two part address as follows:

o The network address assigned when connected to the internet.  This is one,
  two, or three decimal numbers separated by periods.

o A unique local address for each host that connects to the network. Assign
  each host a local address number between 0 and 255.

Combine the network address and the local address with a period between them.


ΓòÉΓòÉΓòÉ 3.8. Destination Address ΓòÉΓòÉΓòÉ

Type the 32-bit dotted decimal notation IP address of the remote host's SLIP
interface.  The Destination Address is a point-to-point link. If the ipdest
keyword appears in your SLIP configuration file, this parameter is passed to
the REXX attachment script. This field is required if you specify an IP
address.


ΓòÉΓòÉΓòÉ 4. Configuring Services (FTP, Domain Name Services) ΓòÉΓòÉΓòÉ

Use this page to configure the following:

o The Codepage to be used for translation.
o The FTP access protection file, TRUSERS
o Domain Name Services:  hostname, domain names, and domain nameserver
  addresses

Pushbuttons

The following pushbuttons are available on this page:

o Add
o Edit
o Delete
o Undo
o Defaults
o Help


ΓòÉΓòÉΓòÉ 4.1. Codepage ΓòÉΓòÉΓòÉ

Enter the filename of the codepage DLL to be used for translation for
applications such as FTP. You can select the codepage from the drop-down list
or type the file name of another codepage DLL. NONE in this field indicates
that no translation is needed. The extension is not needed.


ΓòÉΓòÉΓòÉ 4.2. TRUSERS ΓòÉΓòÉΓòÉ

This list contains users on foreign hosts who are authorized to access
directories, subdirectories, and files on your host.

Use this list box to add, edit, or delete FTP users in TRUSERS list box.

For each user, define the following:

o Username
o Password
o Directory access for read
o Directory access for write

TRUSERS information is saved in the \TCPIP\ETC\TRUSERS file.


ΓòÉΓòÉΓòÉ 4.2.1. Username ΓòÉΓòÉΓòÉ

Type the name that is used to identify the FTP user.  The username can be up to
30 characters.  If the username is anonymous, it must be in lowercase letters.
This field is required.


ΓòÉΓòÉΓòÉ 4.2.2. Password ΓòÉΓòÉΓòÉ

Type a unique string of characters that authorizes the user to access
directories on your host.  The FTP User password can be up to 30 characters and
is case-sensitive.

This field is required for all usernames except the user anonymous, which
requires no password.


ΓòÉΓòÉΓòÉ 4.2.3. Directory Access for Read ΓòÉΓòÉΓòÉ

Type the path name of the directories or subdirectories for which you are
granting read access to the FTP user. The following are examples of directory
access for read:

c:\
   Grants read access to all subdirectories and files in the c:\ directory
c:\anonymous
   Grants read access to only the anonymous subdirectory in the c:\ directory.


ΓòÉΓòÉΓòÉ 4.2.4. Deny Read Access ΓòÉΓòÉΓòÉ

Select this check box to deny read access to the drives and directories listed
in Directory access for read.

Warning: Selecting this check box gives read access to any drive or directory
not explicitly listed in Directory access for read.

Deselect this check box to grant read access to the drives and directories
listed in Directory access for read.


ΓòÉΓòÉΓòÉ 4.2.5. Directory Access for Write ΓòÉΓòÉΓòÉ

Type the path name of the directories or subdirectories for which you are
granting write access to the FTP user. The following are examples of directory
access for write:

c:\
   Grants write access to all subdirectories and files in the c:\ directory
c:\temp d:\doc
   Grants write access to the temp subdirectory in the c:\ directory and the
   doc subdirectory in the d:\ directory


ΓòÉΓòÉΓòÉ 4.2.6. Deny Write Access ΓòÉΓòÉΓòÉ

Select this check box to deny write access to the drives and directories listed
in Directory access for write.

Warning: Selecting this check box gives write access to any drive or directory
not explicitly listed in Directory access for write.

Deselect this check box to grant write access to the drives and directories
listed in Directory access for write.


ΓòÉΓòÉΓòÉ <hidden> Adding TRUSERS Entries ΓòÉΓòÉΓòÉ

To add a FTP user to the TRUSERS list box, do the following:

 1. Select the TRUSERS list box.
 2. Select the Add pushbutton.
 3. Complete the FTP User information.
 4. Select the Add pushbutton to place the FTP User information in TRUSERS.
    Only the username displays in the list.


ΓòÉΓòÉΓòÉ <hidden> Editing a TRUSERS Entry ΓòÉΓòÉΓòÉ

To edit an existing TRUSERS entry, do the following:

 1. Select the TRUSERS entry you want to edit.
 2. Select the Edit pushbutton.
 3. Complete the FTP User modifications.
 4. Select the Edit pushbutton to replace the FTP User information in TRUSERS.


ΓòÉΓòÉΓòÉ <hidden> Deleting TRUSERS Entries ΓòÉΓòÉΓòÉ

To delete an existing TRUSERS entry, do the following:

 1. Select the TRUSERS entry you want to delete.
 2. Select the Delete pushbutton in the Configure Services page.
 3. Select the Yes pushbutton in the Delete FTP User window. To retain the FTP
    User entry in TRUSERS, select the No pushbutton.


ΓòÉΓòÉΓòÉ <hidden> FTP User Add ΓòÉΓòÉΓòÉ

Use this window to add an FTP user entry in the the TRUSERS list box.

To add a user, complete the following entry fields:

o Username
o Password
o Directory access for read
o Directory access for write

To add the FTP user entry in the TRUSERS list box, select the Add pushbutton.

To cancel the addition of the entry to the TRUSERS list box, select the Cancel
pushbutton.

For help on the FTP User entry fields, select the field and press F1 or the
Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> FTP User Edit ΓòÉΓòÉΓòÉ

Use this window to edit an FTP user entry in the TRUSERS list box.

To edit an entry, select any of the following entry fields and replace the
current value:

o Username
o Password
o Directory access for read
o Directory access for write

To replace the FTP user entry in the TRUSERS list box, select the Edit
pushbutton.

To cancel the changes you made to any entry fields, select the Cancel
pushbutton.

For help on the FTP User entry fields, select the field and press F1 or the
Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> FTP User Delete ΓòÉΓòÉΓòÉ

Use this window to delete the highlighted FTP user entry in the TRUSERS list
box.

To delete the highlighted entry, select the Yes pushbutton.

To cancel the deletion of the highlighted entry, select the No pushbutton.


ΓòÉΓòÉΓòÉ 4.3. This Machine's Hostname ΓòÉΓòÉΓòÉ

Type a name for this host that is to be part of a fully-qualified domain name.
A fully-qualified domain name is comprised of a host name and a domain name.
For example, in the fully-qualified domain name:

eng.mit.edu

the host name is eng.  The domain name is mit.edu.


ΓòÉΓòÉΓòÉ 4.4. Domain Name ΓòÉΓòÉΓòÉ

Type the domain where your host resides, including all subdomains and the root
domain, separated by periods.

The domain name is part of a fully-qualified domain name that is a naming
scheme for a hierarchical naming system. A fully-qualified domain name is
comprised of a host name and a domain name, separated by periods. For example,
in the fully-qualified domain name:

eng.mit.mass.edu


ΓòÉΓòÉΓòÉ 4.5. Domain Nameserver ΓòÉΓòÉΓòÉ

This list contains the internet address (IP address) of servers who resolve
domain names to IP addresses. You can specify up to three domain name servers.

Use this list box to add, edit, or delete domain nameserver addresses (IP
addresses).


ΓòÉΓòÉΓòÉ 4.5.1. Nameserver Address ΓòÉΓòÉΓòÉ

Type the internet address (IP address) of a nameserver that resolves domain
names to IP addresses. Type the IP address in 32-bit dotted decimal notation.


ΓòÉΓòÉΓòÉ <hidden> Adding a Domain Nameserver Address ΓòÉΓòÉΓòÉ

To add an entry to the Domain Nameserver list box, do the following:

 1. Select the Domain Nameserver Address list box.
 2. Select the Add pushbutton.
 3. Complete the Nameserver Address entry field.
 4. Select the Add pushbutton to place the nameserver address in the Domain
    Nameserver list box.


ΓòÉΓòÉΓòÉ <hidden> Editing a Domain Nameserver Address ΓòÉΓòÉΓòÉ

To edit a nameserver address, do the following:

 1. Select the entry you want to edit.
 2. Select the Edit pushbutton.
 3. Modify the Nameserver Address entry field.
 4. Select the Edit pushbutton to replace the nameserver address in the Domain
    Nameserver list box.


ΓòÉΓòÉΓòÉ <hidden> Deleting a Domain Nameserver Address ΓòÉΓòÉΓòÉ

To delete a nameserver address entry, do the following:

 1. Select the nameserver address entry you want to delete.
 2. Select the Delete pushbutton in the Configure Services page.
 3. Select the Yes pushbutton to confirm deletion of the nameserver address. To
    retain the nameserver address, select the No pushbutton.


ΓòÉΓòÉΓòÉ <hidden> Nameserver Add ΓòÉΓòÉΓòÉ

Use this window to add a nameserver internet address (IP address) entry in the
Domain Nameserver Address list box.

To add the entry, complete the Nameserver Address entry field and select the
Add pushbutton.

To cancel the addition of the nameserver address, select the Cancel pushbutton.

For help on the Nameserver Address entry field, select the entry field and
press F1 or the Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> Nameserver Edit ΓòÉΓòÉΓòÉ

Use this window to edit a nameserver address (IP address) in the Domain
Nameserver Address list box.

To edit a nameserver address, select the Nameserver Address entry field and
replace the current value.

To replace the Nameserver Address in the Domain Nameserver Address list box,
select the Edit pushbutton.

To cancel the addition of the nameserver address, select the Cancel pushbutton.

For help on the Nameserver Address entry field, select the entry field and
press F1 or the Help pushbutton.


ΓòÉΓòÉΓòÉ 4.6. Nameserver Delete ΓòÉΓòÉΓòÉ

Use this window to delete the selected entry in the Domain Nameserver Address
list box.

To delete the nameserver entry, select the Yes pushbutton.

To cancel the deletion of the selected nameserver entry, select the No
pushbutton.


ΓòÉΓòÉΓòÉ 5. Configuring Services (PINGHOST, LPR, REXEC) ΓòÉΓòÉΓòÉ

Use this page to configure the following PINGHOST, LPR and REXEC parameters:

o PINGHOST.LST host internet addresses (IP addresses)
o Remote Printer Server
o Remote Print Server's Printer
o Maximum number of LPD Ports
o Username for REXEC and Remote Printing
o Password for REXEC Users

Pushbuttons

The following pushbuttons are available on this page:

o Add
o Edit
o Delete
o Undo
o Defaults
o Help


ΓòÉΓòÉΓòÉ 5.1. PINGHOST.LST ΓòÉΓòÉΓòÉ

This list contains host internet addresses (IP addresses) that are monitored
using the PMPING program.

Use this window to add, edit, or delete PINGHOST.LST IP addresses.

PINGHOST.LST is saved in the \TCPIP\ETC directory.


ΓòÉΓòÉΓòÉ 5.1.1. Host IP Address ΓòÉΓòÉΓòÉ

Type the 32-bit dotted decimal notation internet protocol (IP) address of the
host to be monitored. For example 9.67.43.126 is an IP Address.  This field is
required.

Enter the IP Address as a two part address as follows:

o The network address assigned when connected to the internet.  This is one,
  two, or three decimal numbers separated by periods.

o A unique local address for each host that connects to the network. Assign
  each host a local address number between 0 and 255.

Combine the network address and the local address with a period between them.


ΓòÉΓòÉΓòÉ 5.1.2. Description ΓòÉΓòÉΓòÉ

Type a description of the host, up to 40 characters, which is displayed with
the host IP address and the results of the PING.


ΓòÉΓòÉΓòÉ <hidden> Adding a PINGHOST.LST Entry ΓòÉΓòÉΓòÉ

To add a PINGHOST.LST host entry, do the following:

 1. Select the PINGHOST.LST list box.
 2. Select the Add pushbutton.
 3. Complete the Host IP Address and Description entry fields.
 4. Select the Add pushbutton to place the host information in the PINGHOST.LST
    list box.


ΓòÉΓòÉΓòÉ <hidden> Editing a PINGHOST.LST Entry ΓòÉΓòÉΓòÉ

To edit a PINGHOST.LST entry, do the following:

 1. Select the PINGHOST.LST entry you want to edit.
 2. Select the Edit pushbutton.
 3. Complete the PINGHOST.LST entry modifications.
 4. Select the Edit pushbutton to replace the entry in the PINGHOST.LST
    listbox.


ΓòÉΓòÉΓòÉ <hidden> Deleting a PINGHOST.LST Entry ΓòÉΓòÉΓòÉ

To delete a PINGHOST.LST entry, do the following:

 1. Select the PINGHOST.LST you want to delete.
 2. Select the Delete pushbutton in the Configure Services page.
 3. Select the Yes pushbutton in the Delete PINGHOST.LST window.  To retain the
    host in the PINGHOST.LST, select the No pushbutton.


ΓòÉΓòÉΓòÉ <hidden> PINGHOST.LST Add ΓòÉΓòÉΓòÉ

Use this window to add an entry to the PINGHOST.LST list box.

To add an entry, complete the following entry fields:

o Host IP Address
o Description

To add the entry to the PINGHOST.LST list box, select the Add pushbutton.

To cancel the addition of the entry, select the Cancel pushbutton.

For help on any selectable entry field, select the entry field and press F1 or
the Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> PINGHOST.LST Edit ΓòÉΓòÉΓòÉ

Use this window to modify a PINGHOST.LST entry.

To modify an entry, select any of the following entry fields and replace the
current value:

o Host IP Address
o Description

To replace the entry in the PINGHOST.LST list box, select the Edit pushbutton.

To cancel changes you made to the entry fields, select the Cancel pushbutton.

For help on any selectable entry field, select the entry field and press F1. or
the Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> PINGHOST.LST Delete ΓòÉΓòÉΓòÉ

Use this window to delete the highlighted PINGHOST.LST entry.

To delete the highlighted entry, select the Yes pushbutton.

To cancel the deletion of the highlighted entry, select the No pushbutton.


ΓòÉΓòÉΓòÉ 5.2. Remote Printer Server ΓòÉΓòÉΓòÉ

Type the host name of the printer server where you want your line printer (LPR)
requests to be sent.  This information is saved as the LPR_SERVER environment
variable.


ΓòÉΓòÉΓòÉ 5.3. Remote Print Server's Printer ΓòÉΓòÉΓòÉ

Type the name of the printer queue on the remote printer server or a device
name where you want your line printer (LPR) request to be sent.  If you specify
a device name, the LPD server determines the associated queue.

For example, lpt1 is the name of an OS/2 printer and lp0 is the name of a UNIX
printer.

This information is saved as the LPR_PRINTER environment variable.


ΓòÉΓòÉΓòÉ 5.4. Maximum Number of LPD Ports ΓòÉΓòÉΓòÉ

Type a value between 2-64 for the maximum number of ports installed on the
printer server which corresponds to a printer that is driven by an LPD print
server.

This value is entered into the system profile which can only be updated by an
application.


ΓòÉΓòÉΓòÉ 5.5. Username for REXEC & Remote Printing ΓòÉΓòÉΓòÉ

Type the name of the user authorized to log on to your workstation using the
REXEC server. This username is also used by your line printer (LPR) client. The
username can be up to 12 characters and is case-sensitive.

Username is saved as the USER environment variable.


ΓòÉΓòÉΓòÉ 5.6. Password for REXEC Users ΓòÉΓòÉΓòÉ

Type a unique string of characters that authorizes the user to log on to your
workstation.  The password can be up to 12 characters and is case-sensitive.

Password is saved as the PASSWD environment variable.


ΓòÉΓòÉΓòÉ 6. Configuring Services (TELNET, HOSTS, RHOSTS) ΓòÉΓòÉΓòÉ

Use this page to configure the following TELNET, HOSTS, and RHOSTS parameters:

o Telnet Password
o News Reader/2 server
o HOSTS
o RHOSTS

Pushbuttons

The following pushbuttons are available on this page:

o Add
o Edit
o Delete
o Undo
o Defaults
o Help


ΓòÉΓòÉΓòÉ 6.1. Telnet Password ΓòÉΓòÉΓòÉ

Type a unique string of characters that authorizes the user to log on to this
host using the Telnet server.  As you type the password, the character * is
displayed. The Telnet password can be up to 12 characters and is saved in the
TELNET.PASSWORD.ID environment variable.


ΓòÉΓòÉΓòÉ 6.2. News Reader/2 Server ΓòÉΓòÉΓòÉ

Type the name of the News Reader 2 server which is a NNTPD-based news server.
Users can subscribe to different USENET news groups, read news, and post
information.

The information in this field is saved as the NEWSSERVER environment variable
in your CONFIG.SYS.


ΓòÉΓòÉΓòÉ 6.3. HOSTS ΓòÉΓòÉΓòÉ

This list defines internet addresses (IP addresses) and host names for host
name resolution if a name server is not available.

Use this window to add, edit, or delete entries in the HOSTS list box. For each
HOSTS list box entry you define the following:

o Internet Address
o Host Name
o Host Alias
o Host Description

The HOSTS file is saved in the \TCPIP\ETC directory..


ΓòÉΓòÉΓòÉ 6.3.1. Internet Address ΓòÉΓòÉΓòÉ

Type the 32-bit dotted decimal notation internet address (IP) address for the
Host entry field. For example 9.67.43.126 is an IP Address.  This field is
required.

Enter the IP Address as a two-part address as follows:

o The network address assigned when connected to the internet.  This is one,
  two, or three decimal numbers separated by periods.

o A unique local address for each host that connects to the network. Assign
  each host a local address number between 0 and 255.

Combine the network address and the local address with a period between them.


ΓòÉΓòÉΓòÉ 6.3.2. Host Name ΓòÉΓòÉΓòÉ

Type the name of the host that corresponds to the HOSTS internet address (IP
address) entry field.  This field is required.


ΓòÉΓòÉΓòÉ 6.3.3. Alias ΓòÉΓòÉΓòÉ

Optional: Type an alternate host name for the HOSTS internet address (IP
address) entry field.


ΓòÉΓòÉΓòÉ 6.3.4. Description ΓòÉΓòÉΓòÉ

Optional:  To comment on this entry, type up to 40 characters in this entry
field.


ΓòÉΓòÉΓòÉ <hidden> Adding a HOSTS Entry ΓòÉΓòÉΓòÉ

To add a HOSTS entry, do the following:

 1. Select the HOSTS list box.
 2. Select the Add pushbutton.
 3. Complete the HOSTS information.
 4. Select the Add pushbutton to place the HOSTS information in the HOSTS list
    box.  Only the IP address is displayed in the list box.


ΓòÉΓòÉΓòÉ <hidden> Editing a HOSTS Entry ΓòÉΓòÉΓòÉ

To edit a HOSTS entry, do the following:

 1. Select the HOSTS entry you want to edit.
 2. Select the Edit pushbutton.
 3. Complete the HOSTS entry modifications.
 4. Select the Edit pushbutton to replace the HOSTS information in the HOSTS
    list box.


ΓòÉΓòÉΓòÉ <hidden> Deleting a HOSTS Entry ΓòÉΓòÉΓòÉ

To delete a HOSTS entry, do the following:

 1. Select the HOSTS entry you want to delete.
 2. Select the Delete pushbutton in the Configure Services page.
 3. Select the Yes pushbutton in the Delete HOSTS window.  To retain the HOSTS
    entry in the HOSTS list box, select the No pushbutton.


ΓòÉΓòÉΓòÉ <hidden> HOSTS Add ΓòÉΓòÉΓòÉ

Use this window to add an entry to the HOSTS list box.

To add an entry, complete the following entry fields:

o Internet address
o Host
o Host Alias
o Host Description

To add the entry to the HOSTS list box, select the Add pushbutton.

To cancel the addition of the entry to the HOSTS list box, select the Cancel
pushbutton.

For help on any selectable entry field, select the entry field and press F1 or
the Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> HOSTS Edit ΓòÉΓòÉΓòÉ

Use this window to edit the highlighted HOSTS list box entry.

To edit a HOSTS entry, select any of the following entry fields and replace the
current value:

o Internet address
o Host
o Host Alias
o Host Description

To replace the entry in the HOSTS list box, select the Edit pushbutton.

To cancel changes you made to the entry fields, select the Cancel pushbutton.

For help on any selectable entry field, select the entry field and press F1 or
the Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> HOSTS Delete ΓòÉΓòÉΓòÉ

Use the Delete window to delete the highlighted HOSTS entry.

To delete the highlighted entry, select the Yes pushbutton.

To cancel the deletion of the highlighted HOSTS entry, select the No
pushbutton.


ΓòÉΓòÉΓòÉ 6.4. RHOSTS ΓòÉΓòÉΓòÉ

This list defines remote hosts that are authorized to issue commands on this
host using the RSH server.

Use this window to add, edit, or delete entries in the RHOSTS list box. For
each RHOSTS entry you define the following:

o Fully-qualified remote Host name Domain name
o Users served on that host

The RHOSTS file is saved in the \TCPIP\ETC directory.


ΓòÉΓòÉΓòÉ 6.4.1. RHOST Host ΓòÉΓòÉΓòÉ

Type the name of the remote host that is authorized to issue commands on this
host.  Specify the remote host name using its fully-qualified domain name. A
fully-qualified domain name is comprised of a host name and a domain name,
separated by a period. For example, in the fully-qualified domain name:

eng.mit.edu

the host name is eng and the domain name is mit.edu.

Note:  The RHOST Host entry is case sensitive.


ΓòÉΓòÉΓòÉ 6.4.2. Domain Name ΓòÉΓòÉΓòÉ

Type the domain where your host resides, including all subdomains and the root
domain, separated by periods.

The domain name is part of a fully-qualified domain name that is a naming
scheme for a hierarchical naming system. A fully-qualified domain name is
comprised of a host name and a domain name, separated by periods. For example,
in the fully-qualified domain name:

eng.mit.mass.edu


ΓòÉΓòÉΓòÉ 6.4.3. Users Served ΓòÉΓòÉΓòÉ

Type the name of the user on the remote host that is authorized to send
commands to this host.  Only one user can be specified for each host. If no
user is specified, any user on the remote host can send commands to this host.

The RHOSTS Users served entry is case-sensitive.


ΓòÉΓòÉΓòÉ <hidden> Adding a RHOSTS Entry ΓòÉΓòÉΓòÉ

To add an entry to the RHOSTS list box, do the following:

 1. Select the RHOSTS list box.
 2. Select the Add pushbutton.
 3. Complete the RHOSTS information.
 4. Select the Add pushbutton to place the RHOSTS information in the RHOSTS
    list box.  Only the fully-qualified host name is displayed in the list box.


ΓòÉΓòÉΓòÉ <hidden> Editing a RHOSTS Entry ΓòÉΓòÉΓòÉ

To edit a RHOSTS entry, do the following:

 1. Select the RHOSTS entry you want to edit.
 2. Select the Edit pushbutton.
 3. Complete the RHOSTS modifications.
 4. Select the Edit pushbutton to replace the RHOSTS information in the RHOSTS
    list box.


ΓòÉΓòÉΓòÉ <hidden> Deleting a RHOSTS Entry ΓòÉΓòÉΓòÉ

To delete a RHOSTS entry, do the following:

 1. Select the RHOSTS entry you want to delete.
 2. Select the Delete pushbutton in the Configure Services page.
 3. Select the Yes pushbutton in the Delete RHOSTS window.  To retain the
    RHOSTS entry in the RHOSTS list box, select the No pushbutton.


ΓòÉΓòÉΓòÉ <hidden> RHOSTS Add ΓòÉΓòÉΓòÉ

Use this window to add an entry in the RHOSTS list box.

To add an entry, complete the following entry fields:

o RHOST Host
o RHOST Domain name
o Users Served

To add the entry to the RHOSTS list box, select the Add pushbutton.

To cancel the addition of the entry to the RHOSTS list box, select the Cancel
pushbutton.

For help on the RHOSTS entry fields, select the field and press F1 or the Help
pushbutton.


ΓòÉΓòÉΓòÉ <hidden> RHOSTS Edit ΓòÉΓòÉΓòÉ

Use this window to edit an entry in the RHOSTS list box.

To edit an entry, select any of the following entry fields and replace the
current value:

o RHOST Host
o RHOST Domain
o Users Served

To replace the entry in the RHOSTS list box, select the Edit pushbutton.

To cancel the changes to made to any entry fields, select the Cancel
pushbutton.

For help on the RHOSTS entry fields, select the field and press F1 or the Help
pushbutton.


ΓòÉΓòÉΓòÉ <hidden> RHOSTS Delete ΓòÉΓòÉΓòÉ

Use this window to delete the highlighted entry in the RHOSTS listbox.

To delete the highlighted entry, select the Yes pushbutton.

To cancel the deletion of the highlighted RHOSTS entry, select the No
pushbutton.


ΓòÉΓòÉΓòÉ 7. Configuring Services (SNMP) ΓòÉΓòÉΓòÉ

Use this page to configure the following SNMP information:

o SYSCONTACT
o SYSLOCATION
o MIB2.TBL File

Pushbuttons

The following pushbuttons are available on this page:

o Add
o Edit
o Delete
o Undo
o Defaults
o Help


ΓòÉΓòÉΓòÉ 7.1. SYSCONTACT ΓòÉΓòÉΓòÉ

Type the name of the contact person for this node and information on how to
contact this person.  The contact person is usually the system or network
administrator.

The information in this field is saved as the SYSCONTACT environment variable
in your CONFIG.SYS.


ΓòÉΓòÉΓòÉ 7.2. SYSLOCATION ΓòÉΓòÉΓòÉ

Type the physical location of this node, such as building, floor, and room.

The information in this field is saved as the SYSLOCATION environment variable
in your CONFIG.SYS.


ΓòÉΓòÉΓòÉ 7.3. MIB2.TBL File ΓòÉΓòÉΓòÉ

This list maps Management Information Base (MIB) objects in an English-like
textual notation to an Abstract Syntax Notation.1 (ASN.1).

Use this window to add, edit, or delete MIB2.TBL File entries.

If you request MIB object information in textual notation, TCP/IP maps the
textual notation to the ASN.1 notation before the request is sent to an SNMP
agent.

The MIB2.TBL consists of the following information:

o Textual Name
o ASN.1 Name
o Syntax

Examples of MIB2.TBL entries are as follows:

o ifNumber 1.3.6.1.2.1.2.1.0 number
o ifPhysaddress 1.3.6.1.2.1.2.2.1.6 string
o sysObjectID 1.3.6.1.2.1.1.2.0 object

For help on any selectable field, select the field and press F1 or the Help
pushbutton.


ΓòÉΓòÉΓòÉ 7.3.1. Textual Name ΓòÉΓòÉΓòÉ

Type the name of the MIB object that is entered by the user in a snmp command.
For example, in the IBM-supplied MIB2.TBL, sysDescr is a textual name.


ΓòÉΓòÉΓòÉ 7.3.2. ASN.1 Name ΓòÉΓòÉΓòÉ

Type the object identifier for the textual name. This value is sent to the SNMP
agent during a snmp get or snmp next command.

For example, in the IBM-supplied MIB2.TBL, 1.3.6.1.2.1.1.1.0 is the ASN.1 name
for the sysDescr textual name.

ASN.1 names that are scalars (only one instance) must end with .0.

ASN.1 names that are members of a table must end with a digit other than .0.


ΓòÉΓòÉΓòÉ 7.3.3. Syntax ΓòÉΓòÉΓòÉ

Select the syntax value for the data type of the MIB object from the drop-down
list. The syntax values and data types are as follows:

ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöéSyntax    ΓöéData Type       Γöé
ΓöéValue     Γöé                Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCounter   ΓöéCounter         Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéDisplay   ΓöéDisplayString   Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéGauge     ΓöéGauge           Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéInternet  ΓöéNetworkAddress  Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéInternet  ΓöéIpAddress       Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéNumber    ΓöéInteger         Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéObject    ΓöéObject          Γöé
Γöé          ΓöéIdentifier      Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéString    ΓöéOctet String    Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéString    ΓöéPhysAddress     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéTicks     ΓöéTimeTicks       Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ


ΓòÉΓòÉΓòÉ <hidden> Integer ΓòÉΓòÉΓòÉ

Integer is a 32-bit numeric value.


ΓòÉΓòÉΓòÉ <hidden> Octet String ΓòÉΓòÉΓòÉ

Octet String is a string of octets, each byte can be from 0 to 255.


ΓòÉΓòÉΓòÉ <hidden> Object Identifier ΓòÉΓòÉΓòÉ

An Object Identifier is an ASN.1 notation.


ΓòÉΓòÉΓòÉ <hidden> NetworkAddress ΓòÉΓòÉΓòÉ

A NetworkAddress is an address from a protocol family.


ΓòÉΓòÉΓòÉ <hidden> IPAddress ΓòÉΓòÉΓòÉ

IPAddress is a 32-bit internet address.


ΓòÉΓòÉΓòÉ <hidden> Counter ΓòÉΓòÉΓòÉ

Counter is a non-negative integer that increases by one until it reaches a
maximum value and is then reset to 0 and starts increasing again.


ΓòÉΓòÉΓòÉ <hidden> Gauge ΓòÉΓòÉΓòÉ

Gauge is a non-negative integer that can increase or decrease, but which
latches at a maximum value.


ΓòÉΓòÉΓòÉ <hidden> TimeTicks ΓòÉΓòÉΓòÉ

TimeTicks is a nonnegaive integer that counts the time in hundredths of a
second since some event.


ΓòÉΓòÉΓòÉ <hidden> DisplayString ΓòÉΓòÉΓòÉ

DisplayString is an octet string that is limited to the ASCII character set.


ΓòÉΓòÉΓòÉ <hidden> PhysAddress ΓòÉΓòÉΓòÉ

PhysAddress is an octet string used for hardware addresses.


ΓòÉΓòÉΓòÉ <hidden> Adding a MIB2.TBL Entry ΓòÉΓòÉΓòÉ

To add a MIB2.TBL File entry, do the following:

 1. Select the MIB2.TBL File list box.
 2. Select the Add pushbutton.
 3. Complete the MIB2.TBL entry information.
 4. Select the Add pushbutton to place the MIB2.TBL entry information in the
    MIB2.TBL.


ΓòÉΓòÉΓòÉ <hidden> Editing a MIB2.TBL Entry ΓòÉΓòÉΓòÉ

To edit a MIB2.TBL File entry, do the following:

 1. Select the MIB2.TBL File entry you want to edit.
 2. Select the Edit pushbutton.
 3. Complete the MIB2.TBL entry modifications.
 4. Select the Edit pushbutton to replace the entry information in the MIB2.TBL
    File list box.


ΓòÉΓòÉΓòÉ <hidden> Deleting a MIB2.TBL Entry ΓòÉΓòÉΓòÉ

To delete a MIB2.TBL File entry, do the following:

 1. Select the MIB2.TBL File entry you want to delete.
 2. Select the Delete pushbutton in the Configure Services page.
 3. Select the Yes pushbutton in the Delete MIB2.TBL window. To retain the
    entry in the MIB2.TBL File list box, select the No pushbutton.


ΓòÉΓòÉΓòÉ <hidden> MIB2.TBL File Add ΓòÉΓòÉΓòÉ

Use this window to add an entry to the MIB2.TBL File list box.

To add an entry, complete the following entry fields:

o Textual Name
o ASN.1 Name
o Syntax

To add the entry to the MIB2.TBL File list box, select the Add pushbutton.

To cancel the addition of the entry to the MIB2.TBL File list box, select the
Cancel pushbutton.

For help on the MIB2.TBL entry fields, select the field and press F1 or the
Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> MIB2.TBL Edit ΓòÉΓòÉΓòÉ

Use this window to edit an entry in the MIB2.TBL File list box.

To edit an entry, select any of the following entry fields and replace the
current value:

o Textual Name
o ASN.1 Name
o Syntax

To replace the entry in the MIB2.TBL File list box, select the Edit pushbutton.

To cancel the changes you made to any entry fields, select the Cancel
pushbutton.

For help on the MIB2.TBL File entry fields, select the field and press F1 or
the Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> MIB2.TBL Delete ΓòÉΓòÉΓòÉ

Use this window to delete the highlighted entry in the MIB2.TBL File list box.

To delete the highlighted entry, select the Yes pushbutton.

To cancel the deletion of the highlighted entry, select the No push button.


ΓòÉΓòÉΓòÉ 8. Configuring Services (SNMP) ΓòÉΓòÉΓòÉ

Use this page to configure the following SNMP information:

o SNMPTRAP.DST
o PW.SRC File

Pushbuttons

The following pushbuttons are available on this page:

o Add
o Edit
o Delete
o Undo
o Defaults
o Help


ΓòÉΓòÉΓòÉ 8.1. SNMPTRAP.DST ΓòÉΓòÉΓòÉ

This list defines host client names or internet addresses (IP addresses) of
SNMP clients who are sent TRAP messages generated by an SNMP agent.

Use this window to add, edit, or delete SNMPTRAP.DST list box entries.

For help on any selectable field, select the field and press F1 or the Help
pushbutton.


ΓòÉΓòÉΓòÉ 8.1.1. Host ΓòÉΓòÉΓòÉ

Type the 32-bit dotted decimal notation internet protocol (IP) address or the
host name of a host to receive TRAP messages. For example, 9.67.43.126 is an IP
Address and Manager2 is a host name.

Type the IP Address as a two part address as follows:

o The network address assigned when connected to the internet.  This is one,
  two, or three decimal numbers separated by periods.

o A unique local address for each host that connects to the network. Assign
  each host a local address number between 0 and 255.

Combine the network address and the local address with a period between them.


ΓòÉΓòÉΓòÉ <hidden> Adding SNMPTRAP.DST Entries ΓòÉΓòÉΓòÉ

To add an entry to the SNMPTRAP.DST list box, do the following:

 1. Select the SNMPTRAP.DST list box.
 2. Select the Add pushbutton.
 3. Compete the host information.
 4. Select the Add pushbutton to place the entry in the SNMPTRAP.DST list box.


ΓòÉΓòÉΓòÉ <hidden> Editing SNMPTRAP.DST Entries ΓòÉΓòÉΓòÉ

To edit a SNMPTRAP.DST entry, do the following:

 1. Select the SNMPTRAP.DST entry you want to edit.
 2. Select the Edit pushbutton.
 3. Complete the SNMPTRAP.DST entry modifications.
 4. Select the Edit pushbutton to replace the entry in the SNMPTRAP.DST list
    box.
For help on any selectable field, select the field and press F1 or the Help
pushbutton.


ΓòÉΓòÉΓòÉ <hidden> Deleting a SNMPTRAP.DST Entry ΓòÉΓòÉΓòÉ

To delete a SNMPTRAP.DST entry, do the following:

 1. Select the SNMPTRAP.DST entry you want to delete.
 2. Select the Delete pushbutton from the Configure Services page.
 3. Select the Yes pushbutton on the Delete SNMPTRAP.DST window.  To retain the
    entry in the SNMPTRAP.DST list box, select the No pushbutton.


ΓòÉΓòÉΓòÉ <hidden> SNMPTRAP.DST Add ΓòÉΓòÉΓòÉ

Use this window to add an entry to the SNMPTRAP.DST list box.

To add an entry, complete the host entry field and select the Add pushbutton.

To cancel the addition of the entry to the SNMPTRAP.DST list box, select the
Cancel pushbutton.

For help on the SNMPTRAP.DST host entry field, select the field and press F1 or
the Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> SNMPTRAP.DST Edit ΓòÉΓòÉΓòÉ

Use this window to edit an entry in the SNMPTRAP.DST list box.

To edit an entry, select the host entry field and replace the current value.

To replace the entry in the SNMPTRAP.DST list box, select the Edit pushbutton.

To cancel the changes you made to the host entry field, select the Cancel
pushbutton.

For help on the SNMPTRAP.DST host entry field, select the field and press F1 or
the Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> SNMPTRAP.DST Delete ΓòÉΓòÉΓòÉ

Use this window to delete the highlighted entry in the SNMPTRAP.DST list box.

To delete the highlighted entry, select the Yes pushbutton.

To cancel the deletion of the highlighted entry, select the No pushbutton.


ΓòÉΓòÉΓòÉ 8.2. PW.SRC File ΓòÉΓòÉΓòÉ

This list contains information that is used to verify that a host is authorized
to request SNMP information from the SNMP agent.

Use this window to add, edit, or delete entries in the PW.SRC File list box.

The PW.SRC File consists of the following information:

o Community Name
o Desired Network
o SNMP Mask


ΓòÉΓòÉΓòÉ 8.2.1. Community Name ΓòÉΓòÉΓòÉ

Type a unique string of characters used to verify that a request for SNMP
information is valid.  The community name is similar to a password.


ΓòÉΓòÉΓòÉ 8.2.2. Desired Network ΓòÉΓòÉΓòÉ

Type either an internet address (IP address) or a pattern of decimal numbers in
32-bit dotted decimal notation.

If you type an IP address, only this host can use the community name specified
in this SNMPTRAP.DST entry.  Type an SNMP mask of 255.255.255.255 if you use an
IP address in this entry field.

If you type a pattern of decimal numbers in 32-bit dotted decimal notation, it
is the result of performing a logical AND operation with the IP address
requesting SNMP information and the SNMP mask.

To allow any host with the correct community name to make SNMP requests, type a
SNMP mask and a desired network of 0.0.0.0.


ΓòÉΓòÉΓòÉ 8.2.3. SNMP Mask ΓòÉΓòÉΓòÉ

Type the 32-bit dotted decimal notation of a pattern of numbers, which when a
logical AND is performed with the SNMP mask and the internet address (IP
address) of the SNMP request, the result is the desired network.

If the results of the logical AND operation match the desired network, the SNMP
request is accepted.

For example, if a logical AND operation is performed on the IP address
9.34.22.122 and a SNMP mask of 255.0.0.0, the desired network is 9.0.0.0 and
the request is accepted.

To allow SNMP requests only from the host specified in the Desired Network
entry field, type a subnet mask of 255.255.255.255.

To allow any host with the correct community name to make SNMP requests, type a
SNMP mask and a desired network of 0.0.0.0.


ΓòÉΓòÉΓòÉ <hidden> Adding PW.SRC File Entries ΓòÉΓòÉΓòÉ

To add an entry to the PW.SRC File list box, do the following:

 1. Select the PW.SRC File list box.
 2. Select the Add pushbutton.
 3. Complete the PW.SRC File entry information.
 4. Select the Add pushbutton to place the entry in the PW.SRC File list box.

For help on any selectable field, select the field and press F1 or the Help
pushbutton.


ΓòÉΓòÉΓòÉ <hidden> Deleting PW.SRC File Entries ΓòÉΓòÉΓòÉ

To delete a PW.SRC File entry, do the following:

 1. Select the PW.SRC File entry you want to delete.
 2. Select the Delete pushbutton in the Configure Services page.
 3. Select the Yes pushbutton in the Delete PW.SRC File window. To retain the
    entry in the PW.SRC File list box, select the No pushbutton.


ΓòÉΓòÉΓòÉ <hidden> Editing PW.SRC File Entries ΓòÉΓòÉΓòÉ

To edit a PW.SRC File entry, do the following:

 1. Select the PW.SRC File entry you want to edit .
 2. Select the Edit pushbutton.
 3. Complete the PW.SRC File entry modifications.
 4. Select the Edit pushbutton to replace the entry in the PW.SRC File list
    box.


ΓòÉΓòÉΓòÉ <hidden> PW.SRC File Add ΓòÉΓòÉΓòÉ

Use this window to add an entry to the PW.SRC File list box.

To add an entry, complete the following:

o Community Name
o Desired Network
o SNMP mask

To add the entry to the PW.SRC File list box, select the Add pushbutton.

To cancel the addition of the entry to the PW.SRC File list box, select the
Cancel pushbutton.

For help on any selectable entry field, select the field and press F1 or the
Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> PW.SRC File Edit ΓòÉΓòÉΓòÉ

Use this window to edit an entry in the PW.SRC File list box.

To edit an entry, select any of the following entry fields and replace the
current value:

o Community Name
o Desired Network
o SNMP mask

To replace the entry in the PW.SRC File list box, select the Edit pushbutton.

To cancel the changes you made to any entry fields, select the Cancel
pushbutton.

For help on any selectable entry field, select the field and press F1 or the
Help pushbutton.


ΓòÉΓòÉΓòÉ <hidden> PW.SRC File Delete ΓòÉΓòÉΓòÉ

Use this window to delete the highlighted entry in the PW.SRC File list box.

To delete the highlighted entry, select the Yes pushbutton.

To cancel the deletion of the highlighted entry, select the No pushbutton.


ΓòÉΓòÉΓòÉ <hidden> -p port ΓòÉΓòÉΓòÉ

Specifies the port that Telnetd is to use. If no port is specified,Telnetd uses
the well-known Telnet port.


ΓòÉΓòÉΓòÉ <hidden> -b ΓòÉΓòÉΓòÉ

Specifies that the copyright information is to be printed.


ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ

Specifies that debugging is to take place and error messages displayed.


ΓòÉΓòÉΓòÉ <hidden> -l ΓòÉΓòÉΓòÉ

Specifies that a log of the Telnetd messages is created.


ΓòÉΓòÉΓòÉ <hidden> -e escapedelay ΓòÉΓòÉΓòÉ

Specifies the time delay for an escape from a Telnet session. The default is
50.


ΓòÉΓòÉΓòÉ <hidden> -u password ΓòÉΓòÉΓòÉ

Specifies your password on the remote host. The default is the Telnet password
set in the environment variables. If this parameter is not specified and the
password is not set in the environment variables, you will receive an error
message.


ΓòÉΓòÉΓòÉ <hidden> path ΓòÉΓòÉΓòÉ

The path for which you are granting access to the TFTP client. The path is used
as a prefix for all file names specified by the put and get subcommands of
TFTP.


ΓòÉΓòÉΓòÉ <hidden> -p port ΓòÉΓòÉΓòÉ

Specifies the port that FTPD is to use.  If no port is specified, FTPD uses the
well-known FTPD port.


ΓòÉΓòÉΓòÉ <hidden> -t seconds ΓòÉΓòÉΓòÉ

Specifies the number of seconds before the server will timeout while servicing
a client command.  The default is 180.  If you do not want a timeout, specify
-1.


ΓòÉΓòÉΓòÉ <hidden> -c ΓòÉΓòÉΓòÉ

Prevents printing of the control file.


ΓòÉΓòÉΓòÉ <hidden> -b banner ΓòÉΓòÉΓòÉ

Prints either a specific banner or none at all. banner is the optional file
containing the copyright information to be printed. If you specify a banner
file, that file is used as the banner. If you do not specify a banner file, a
banner is not printed.

If you specify a banner file with the -b parameter, the following keywords can
be used to display specific job information.

Keyword     Description
%H%         Name of the host that originated the print job
%U%         Name of the user that originated the print job
%J%         Name of the print job
%C%         Class of the print job


ΓòÉΓòÉΓòÉ <hidden> -s ΓòÉΓòÉΓòÉ

Causes LPD to validate client requests based on the port addresses. According
to RFC 1179, all line printer requests should come from clients on a port
within the range of 721 to 731. However, because some clients do not support
this range, the default does not verify that the client is connecting from a
valid port within this range.


ΓòÉΓòÉΓòÉ <hidden> -f ΓòÉΓòÉΓòÉ

Changes the default file format from binary to text.

When a client sends a print job to an LPD server, the client can specify that
the job is of a particular file format.

LPD recognizes two file formats:

o Binary
o Text

When LPD receives a binary file, the file is sent as is directly to the
specified queue for printing. If the file received is a text file, LPD first
converts each line feed (LF) to a carriage return line feed (CRLF) pair. The
file is then sent to the specified queue.

If a client fails to specify a file format, or if a client specifies a format
other than binary or text, LPD treats the job as if it were binary. To change
the default file format from binary to text, use the -f parameter on the LPD
command line.


ΓòÉΓòÉΓòÉ <hidden> etc_dir ΓòÉΓòÉΓòÉ

Specified the base directory for the FSTAB file. If you do not specify this
parameter, the value of the ETC environment variable is used.


ΓòÉΓòÉΓòÉ <hidden> -bn ΓòÉΓòÉΓòÉ

Sets the transfer buffer size for read and write requests. This number must not
exceed 8192. The default value is 8192.


ΓòÉΓòÉΓòÉ <hidden> -rn ΓòÉΓòÉΓòÉ

Sets the number of remote procedure call (RPC) retries that the OS/2 NFS Client
sends to the server before ending the access attempt. The default value is 5.


ΓòÉΓòÉΓòÉ <hidden> -tn ΓòÉΓòÉΓòÉ

Sets the time-out value (in seconds) for an RPC request. The default value is
1.


ΓòÉΓòÉΓòÉ <hidden> -sn ΓòÉΓòÉΓòÉ

Defines the number of Biods that are to be started by NFSCTL, the OS/2 NFS
client control program. The Biods are a tool to allow parallel reads and writes
to a file. The default value is 4.


ΓòÉΓòÉΓòÉ <hidden> -p ΓòÉΓòÉΓòÉ

Requests that the OS/2 NFS Client control program use the Biods for both
reading and writing.


ΓòÉΓòÉΓòÉ <hidden> -w ΓòÉΓòÉΓòÉ

Specifies that the OS/2 NFS Client control program use the Biods for reading
only. The -w parameter is used with any servers that do not support parallel
writes to a file. -w is the default.


ΓòÉΓòÉΓòÉ <hidden> -c ΓòÉΓòÉΓòÉ

Respects case when performing file name comparisons. If you do not specify this
parameter and if the first query fails, the OS/2 NFS Client will try the name
in uppercase. If this attempt also fails, the OS/2 NFS Client will try the name
in lowercase.


ΓòÉΓòÉΓòÉ <hidden> -z ΓòÉΓòÉΓòÉ

Respects file name case when creating files and directories. If you do not
specify parameter, files and directories will be created in lowercase.


ΓòÉΓòÉΓòÉ <hidden> -i ΓòÉΓòÉΓòÉ

Specifies that the OS/2 NFS Client does serial read/write requests instead of
parallel read/write requests. This is equivalent to specifying the -s0
parameter.


ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ

Enables additional debugging information to be logged, such as corrupted
packets received.


ΓòÉΓòÉΓòÉ <hidden> -g ΓòÉΓòÉΓòÉ

Offers a route to the default destination. You can use this on a gateway to an
internet or on a gateway that uses another routing protocol whose routes are
not reported to other local gateways.


ΓòÉΓòÉΓòÉ <hidden> -s ΓòÉΓòÉΓòÉ

Forces the routed command to supply routing information, regardless of whether
it is acting as an internetwork router. This occurs if there is more than one
network interface present or if a point-to-point link is in use.


ΓòÉΓòÉΓòÉ <hidden> -q ΓòÉΓòÉΓòÉ

Suppresses broadcasting of routing information.


ΓòÉΓòÉΓòÉ <hidden> -t ΓòÉΓòÉΓòÉ

Starts the packet tracing process.


ΓòÉΓòÉΓòÉ <hidden> -t -t ΓòÉΓòÉΓòÉ

Starts the packet tracing process and traces all packets sent or received on
the standard output. The spaces between the parameters are required.


ΓòÉΓòÉΓòÉ <hidden> -t -t -t ΓòÉΓòÉΓòÉ

Starts the packet tracing process, traces all packets sent or received on the
standard output, and starts history tracing. The spaces between the parameters
are required.


ΓòÉΓòÉΓòÉ <hidden> -t -t -t -t ΓòÉΓòÉΓòÉ

Starts the packet tracing process, traces all packets sent or received on the
standard output, starts history tracing, and starts tracing the packet
contents. The spaces between the parameters are required.


ΓòÉΓòÉΓòÉ <hidden> -bd ΓòÉΓòÉΓòÉ

Starts SENDMAIL as a server.


ΓòÉΓòÉΓòÉ <hidden> -qtime ΓòÉΓòÉΓòÉ

Specifies how often the mail queue can be processed. Enter the time as a number
and a letter, where the letter is one of the following:

s for seconds
m for minutes
h for hours
d for days
w for weeks

For example:

-q30m specifies every 30 minutes

-q1h30m specifies every hour and 30 minutes


ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ

Writes detailed debugging information to the SENDMAIL console, and creates a
SENDMAIL.LOG file that contains the simple mail transfer protocol (SMTP)
transactions between the SENDMAIL server and the remote SMTP server.

The SENDMAIL.LOG file is placed in the ETC directory. For example, to start the
SENDMAIL server with detailed debug information, use:

[C:\]sendmail -bd -q30m -d


ΓòÉΓòÉΓòÉ <hidden> -d1.1 ΓòÉΓòÉΓòÉ

Creates only the SENDMAIL.LOG file.


ΓòÉΓòÉΓòÉ <hidden> X Window System ΓòÉΓòÉΓòÉ

X Window System is a trademark of Massachusetts Institute of Technology.


ΓòÉΓòÉΓòÉ <hidden> -clickclienttoraise ΓòÉΓòÉΓòÉ

Tells the server to raise windows to the top when clicks are done in the
application (client) area, which is the usual Presentation Manager behavior.
(Clicks in the PM frame also can raise the window.) This option turns off any
previous -clickframetoraise option on the pmx command line.  This option is the
default.


ΓòÉΓòÉΓòÉ <hidden> -clickframetoraise ΓòÉΓòÉΓòÉ

Tells the server to raise windows to the top only when clicks are done on the
PM frame. Clicking on the application (client) area will not raise the window.
This option turns off any previous -clickclienttoraise option on the pmx
command line.


ΓòÉΓòÉΓòÉ <hidden> -co filename ΓòÉΓòÉΓòÉ

Sets the color database file name. The default is TCPIP\X11\RGB.TXT.


ΓòÉΓòÉΓòÉ <hidden> -explicitfocus ΓòÉΓòÉΓòÉ

Tells the server to transfer focus from one client window to another only by
clicking in the window. This is the normal behavior for Presentation Manager
windows and is the default behavior for the server. This option turns off any
previous -implicitfocus option on the pmx command line.


ΓòÉΓòÉΓòÉ <hidden> -fc fontname ΓòÉΓòÉΓòÉ

Sets the cursor font. The default is cursor.


ΓòÉΓòÉΓòÉ <hidden> -fn fontname ΓòÉΓòÉΓòÉ

Sets default font. The default is fixed.


ΓòÉΓòÉΓòÉ <hidden> -fp pathname ΓòÉΓòÉΓòÉ

Sets the default font path. The default is
TCPIP\X11\MISC,TCPIP\X11\75DPI,TCPIP\X11\SPEEDO.


ΓòÉΓòÉΓòÉ <hidden> -implicitfocus ΓòÉΓòÉΓòÉ

Tells the server to transfer focus from one client window to another simply by
moving the pointer into the client area of the window. It is not necessary to
click on a client window to transfer focus to it (provided some PMX client
window already has focus). This is not the normal behavior for Presentation
Manager windows. This option turns off any previous -explicitfocus option on
the pmx command line.


ΓòÉΓòÉΓòÉ <hidden> -k n ΓòÉΓòÉΓòÉ

Sets the keyboard type, where n comes from the following list.  Typical USA
keyboards have 101 keys; European languages usually have 102 keys.  PMX handles
three types of Japanese keyboards.

 KEYBOARD TYPE                -K FLAG VALUE
------------------            ---------------
 101 key                       101
 102 key                       102
 Japanese 5576-A01 (106        5576-A01 or 5576A01 or
 keys)                          106A
 Japanese 5576-001 (124        5576-001 or 5576001 or
 keys)                          124
 Japanese 5576-002 (106        5576-002 or 5576002 or
 keys)                          106


ΓòÉΓòÉΓòÉ <hidden> -lc ΓòÉΓòÉΓòÉ

Doubles the dimensions of any cursor, unless it will become too large to be a
Presentation Manager cursor.


ΓòÉΓòÉΓòÉ <hidden> -nocopyright ΓòÉΓòÉΓòÉ

Does not display initial copyright window when starting.


ΓòÉΓòÉΓòÉ <hidden> -pmcursor ΓòÉΓòÉΓòÉ

Indicates that PMX should use the PM arrow as the cursor, not an X Window
System cursor.


ΓòÉΓòÉΓòÉ <hidden> -r ΓòÉΓòÉΓòÉ

Turns on automatic repeating of keys on the keyboard. This is the default.


ΓòÉΓòÉΓòÉ <hidden> r ΓòÉΓòÉΓòÉ

Turns off automatic repeating of keys on the keyboard.


ΓòÉΓòÉΓòÉ <hidden> -l ΓòÉΓòÉΓòÉ

Ignores all remaining arguments.


ΓòÉΓòÉΓòÉ <hidden> -logpath <directory> ΓòÉΓòÉΓòÉ

Specifies where to put the PMX.LOG log file. If -logpath is not specified, the
directory for PMX.LOG is specified by the ETC environment variable. If PMX
files are stored on a shared read-only disk, this allows the log file to be
placed elsewhere.


ΓòÉΓòÉΓòÉ <hidden> -nocascade ΓòÉΓòÉΓòÉ

Windows that are not initially positioned by user specifications normally are
cascaded down the screen.  The -nocascade parameter says to not cascade if the
application provided an initial location.


ΓòÉΓòÉΓòÉ <hidden> -colorcursor ΓòÉΓòÉΓòÉ

Indicates that PMX should use an X Window System colored cursor.  This is the
default unless the PM display device driver does not support colored cursors.


ΓòÉΓòÉΓòÉ <hidden> -staticcolor ΓòÉΓòÉΓòÉ

Tells PMX to provide a StaticColor visual (nonmodifiable color map) for
applications to select. You can specify the -staticcolor parameter using the
abbreviation -static.


ΓòÉΓòÉΓòÉ <hidden> -bwcursor ΓòÉΓòÉΓòÉ

Indicates that PMX should use an X Window System cursor, but with only black
and white instead of colors.  This is the default if the PM display device
driver does not support colored cursors.


ΓòÉΓòÉΓòÉ <hidden> -reversecolorcursor ΓòÉΓòÉΓòÉ

Indicates that PMX should use an X Window System colored cursor.  The
foreground and background colors will be reversed from the normal colors. For
example, the normal X Window System cursor will be black on the outside, and
white in the middle.


ΓòÉΓòÉΓòÉ <hidden> -reversebwcursor ΓòÉΓòÉΓòÉ

Indicates that PMX should use an X Window System cursor, but with only black
and white instead of colors.  Black and white will be reversed from the normal
colors. For example, the normal X Window System cursor will be black on the
outside and white in the middle.


ΓòÉΓòÉΓòÉ <hidden> -pseudocolor ΓòÉΓòÉΓòÉ

Tells PMX to provide a PseudoColor visual (modifiable color maps) for
applications to select.  You can specify the -pseudocolor parameter with the
abbreviation -pseudo.


ΓòÉΓòÉΓòÉ <hidden> -ifconify ΓòÉΓòÉΓòÉ

Specifies that the X Window System server window will automatically reduce to a
window-list entry.  The X Window System server will also be shown as an icon in
the minimized window folder or on the desktop.


ΓòÉΓòÉΓòÉ <hidden> 32-bit dotted decimal ΓòÉΓòÉΓòÉ

The syntactic representation for a 32-bit integer that consists of four 8-bit
numbers, written in base 10 and separated by periods (dots). Many internet
application programs accept dotted-decimal notations in place of destination
machine names.


ΓòÉΓòÉΓòÉ <hidden> Edit Pushbutton ΓòÉΓòÉΓòÉ

Select this pushbutton to implement the changes made to the selected item.


ΓòÉΓòÉΓòÉ <hidden> Add Pushbutton ΓòÉΓòÉΓòÉ

Select this pushbutton to add an entry to a list box.


ΓòÉΓòÉΓòÉ <hidden> Cancel Pushbutton ΓòÉΓòÉΓòÉ

Select this pushbutton to leave the window.  Changed information is not saved.


ΓòÉΓòÉΓòÉ <hidden> Defaults Pushbutton ΓòÉΓòÉΓòÉ

Select this pushbutton to change to the settings determined by TCP/IP.


ΓòÉΓòÉΓòÉ <hidden> Delete Pushbutton ΓòÉΓòÉΓòÉ

Select this pushbutton to delete the highlighted entry in a list box.


ΓòÉΓòÉΓòÉ <hidden> Edit Pushbutton ΓòÉΓòÉΓòÉ

Select this pushbutton to modify the highlighted entry in a list box.


ΓòÉΓòÉΓòÉ <hidden> Help Pushbutton ΓòÉΓòÉΓòÉ

Select this pushbutton for help on the current field or pushbutton.


ΓòÉΓòÉΓòÉ <hidden> Insert After Pushbutton ΓòÉΓòÉΓòÉ

Select this pushbutton to add an entry after the highlighted entry in a list
box.


ΓòÉΓòÉΓòÉ <hidden> Insert Before Pushbutton ΓòÉΓòÉΓòÉ

Select this pushbutton to add an entry before the highlighted entry in a list
box.


ΓòÉΓòÉΓòÉ <hidden> Undo Pushbutton ΓòÉΓòÉΓòÉ

Select this pushbutton to cancel any changes that were made since the last time
this page was saved.


ΓòÉΓòÉΓòÉ <hidden> IBM Trademarks ΓòÉΓòÉΓòÉ

The following terms, denoted by an asterisk at their first occurrence in a
window, are trademarks of IBM Corporation:

AIX
IBM
OS/2
Presentation Manager
PS/2
RISC System/6000


ΓòÉΓòÉΓòÉ <hidden> Non-IBM Trademarks ΓòÉΓòÉΓòÉ

The following terms, denoted by a double asterisk in this online document, are
trademarks of other companies:

Trademark Owned by
PortmapperSun Microsystems, Inc.
SunSun Microsystems, Inc.
UNIXUNIX System Laboratories, Inc.
X Window SystemMassachusetts Institute of Technology
NFSSun Microsystems, Inc.